AUTOMOTIVE SHOP EQUIPMENT MAINTENANCE CHECKLIST

Created by ChecklistGuro (https://checklistguro.com)

--- DIAGNOSTIC EQUIPMENT ---
[ ] Scanner Model Year
[ ] Scanner Software Version (Latest Version, Version 1.x, Version 2.x)
[ ] Last Calibration Date
[ ] Estimated Calibration Time (if applicable)
[ ] Diagnostic Error Codes Encountered (if any)
[ ] Connectivity Issues? (Yes, No)
[ ] Oscilloscope Channel Count

--- LIFTING EQUIPMENT ---
[ ] Last Inspection Date
[ ] Lift Capacity (lbs)
[ ] Hydraulic Fluid Level (Full, Adequate, Low)
[ ] Cable Condition (Good, Fair, Poor)
[ ] Notes/Observations (e.g., unusual noises, leaks)
[ ] Safety Interlocks Functioning? (Yes, No, N/A)
[ ] Inspector Signature

--- AIR COMPRESSION SYSTEMS ---
[ ] Air Tank Pressure (PSI)
[ ] Compressor Noise Level (Normal, Slightly Elevated, Excessive)
[ ] Description of Any Unusual Noises
[ ] Air Filter Condition (Scale 1-5, 1=New, 5=Replace)
[ ] Hose/Line Issues (Leaks, Cracks, Kinks, Wear and Tear, None)
[ ] Last Maintenance Date

--- WELDING EQUIPMENT ---
[ ] Welder Amperage Setting
[ ] Welder Voltage Setting
[ ] Welding Process Used (e.g., MIG, TIG, Stick) (MIG, TIG, Stick)
[ ] Notes on Welding Quality or Concerns
[ ] Last Calibration Date
[ ] Upload Photo of Welding Area (Optional)
[ ] Condition of Welding Torch (Excellent, Good, Fair, Poor)

--- PAINTING EQUIPMENT ---
[ ] Air Pressure (PSI)
[ ] Paint Flow Rate (GPM)
[ ] Spray Gun Condition (Excellent, Good, Fair, Poor)
[ ] Last Filter Change
[ ] Notes on Operation/Issues
[ ] Ventilation System Status (Operating Normally, Reduced Flow, Malfunctioning)
[ ] Photo of Spray Booth Condition

--- TIRE SERVICE EQUIPMENT ---
[ ] Tire Changer Cycle Count
[ ] Tire Balancer Cycle Count
[ ] Alignment Machine Measurement Accuracy (mm)
[ ] Last Calibration Date - Tire Changer
[ ] Last Calibration Date - Tire Balancer
[ ] Last Calibration Date - Alignment Machine
[ ] Tire Changer Lubrication Status (Lubricated, Needs Lubrication)
[ ] Observed Issues (Unusual Noises, Slow Operation, Calibration Error, None)

--- BRAKE SERVICE EQUIPMENT ---
[ ] Lathe Cycle Count
[ ] Last Calibration Date (Lathe)
[ ] Time of Last Calibration (Lathe)
[ ] Disc Grinder RPM
[ ] Brake Bleeder Type (Manual, Automated)
[ ] Notes on Brake Bleeder Performance
[ ] Bleeder Hose Condition (Good, Fair, Needs Replacement)
[ ] Attach Photo of Disc Grinder Condition (if needed)

--- FLUID MANAGEMENT SYSTEMS ---
[ ] Last Oil Extractor Service Date
[ ] Oil Extractor Fluid Level (Gallons)
[ ] Coolant Flush Machine Pressure (PSI)
[ ] Coolant Type (Conventional, OAT, HOAT, Hybrid/Electric)
[ ] Notes on Part Washer Performance/Issues
[ ] Last Filter Change Time
[ ] Fluid Disposal Compliance (Recycled, Landfill, Reclaimed)
[ ] Technician Signature

--- GENERAL MAINTENANCE ---
[ ] Equipment Voltage (V)
[ ] Equipment Amperage (A)
[ ] Last Lubrication Date
[ ] Time of Voltage Check
[ ] Condition of Power Cord (Excellent, Good, Fair, Poor)
[ ] Notes/Observations

--- SAFETY CHECKS ---
[ ] Emergency Lighting Functionality? (Functional, Needs Repair)
[ ] CO Detector Reading (ppm)
[ ] Fire Suppression System Status (Operational, Needs Inspection, Out of Service)
[ ] Last Safety Inspection Date
[ ] Emergency Exit Signs Illuminated? (Yes, No)
[ ] Inspector Signature

--- END OF TEMPLATE ---
Transform this text into a digital, automated, and trackable mobile app!
Visit: https://checklistguro.com/templates/automotive/automotive-shop-equipment-maintenance-checklist
(Click "Install Template" to launch your digital inspection tool immediately)