FLASHING INSTALLATION CHECKLIST

Created by ChecklistGuro (https://checklistguro.com)

--- PRE-INSTALLATION & PLANNING ---
[ ] Review Project Plans and Specifications? (Yes, No)
[ ] Describe any discrepancies between plans and site conditions.
[ ] Confirm Flashing Material Quantity (per plans).
[ ] Confirm Flashing Material Type? (Matches Specifications, Requires Substitution (Document))
[ ] Document any material substitutions and approvals.
[ ] Date of Plan Review and Approval (if applicable).
[ ] Confirm Weather Conditions are Suitable for Installation? (Yes, No - Delay Required)

--- MATERIAL VERIFICATION & HANDLING ---
[ ] Flashing Material Type Received? (Copper, Aluminum, Steel, Galvanized Steel, Stainless Steel, Other)
[ ] Material Manufacturer
[ ] Quantity Received (linear feet/sheets)
[ ] Quantity Ordered
[ ] Material Condition Upon Arrival? (Excellent, Minor Damage, Significant Damage)
[ ] Description of Any Damage (if applicable)
[ ] Material Storage Method? (Flat on Ground (Protected), Pallet Storage, Elevated Platform, Other)
[ ] Notes Regarding Material Storage

--- SUBSTRATE PREPARATION ---
[ ] Sheathing Condition (Sound & Stable, Minor Damage (patched), Significant Damage (requires repair/replacement))
[ ] Sheathing Thickness (inches)
[ ] Existing Moisture Damage? (No, Minor, Significant (requires remediation))
[ ] Describe any substrate repairs made
[ ] Framing Material (Wood, Steel, Aluminum)
[ ] Note any existing sealant/caulk removal
[ ] Surface Cleanliness (Clean & Dry, Dusty, Oily/Contaminated)

--- FLASHING INSTALLATION - GENERAL ---
[ ] Flashing Material Type? (Aluminum, Copper, Galvanized Steel, Stainless Steel, Other (Specify in LONG_TEXT))
[ ] Flashing Thickness (Gauge)
[ ] Notes on material condition upon arrival (dents, scratches, etc.)
[ ] Fastener Type Used? (Staples, Screws, Nails, Other (Specify in LONG_TEXT))
[ ] Describe any special installation techniques required (e.g., pre-bending, forming)
[ ] Overlap Distance (inches)
[ ] Sealing Compound Used (if applicable) (None, Polyurethane, Silicone, Butyl Tape, Other (Specify in LONG_TEXT))
[ ] Record any unusual site conditions affecting installation.

--- WALL FLASHING INSTALLATION ---
[ ] Window Flashing Type (Z-Flashing, R-Channel, Drip Edge, Custom Fabricated)
[ ] Flashing Lap (inches) at Windows
[ ] Door Sill Flashing Type (Pre-fabricated Sill Pan, Flat Metal Flashing, Custom Fabricated)
[ ] Sill Pan Slope (inches/foot)
[ ] Notes on Flashing around Penetrations (pipes, vents)
[ ] Wall/Window Interface Sealed With: (Caulk, Sealant, Combination of Caulk and Tape)
[ ] Photo Documentation of Window/Wall Flashing
[ ] Manufacturer of Flashing Material

--- ROOF FLASHING INSTALLATION ---
[ ] Roof Slope Category? (Low Slope (â‰¤ 3:12), Medium Slope (4:12 - 12:12), Steep Slope (>12:12))
[ ] Valley Angle (degrees)
[ ] Flashing Material Used? (Aluminum, Copper, Galvanized Steel, Stainless Steel)
[ ] Flashing Overlap (inches) - Valley
[ ] Flashing Overlap (inches) - Chimney/Vent
[ ] Notes on Chimney/Vent Flashings
[ ] Skylight Flashing Type? (Integrated Flashing, Z-Flashing, Step Flashing)
[ ] Photo of Skylight Flashings (pre/during/post)
[ ] Detailing notes for roof penetrations

--- DETAILING & OVERLAPS ---
[ ] Minimum Lap Overlap (inches)
[ ] Minimum End Lap Overlap (inches)
[ ] Flashing Joint Type (Lapped, Corrugated, Flat, Other)
[ ] Details of Flashing Joint Type (if 'Other' selected)
[ ] Sealant/Caulk Compatibility (Confirmed Compatible, Not Confirmed, N/A - No Sealant Used)
[ ] Notes on Sealant Application (if applicable)
[ ] Flashing Securing Method (Fasteners, Adhesive, Both, Other)
[ ] Details of Securing Method (if 'Other' selected)
[ ] Photos of Overlap and Detailing

--- FINAL INSPECTION & CLEANUP ---
[ ] Overall Flashing Appearance (Excellent - Neat, Clean, Properly Aligned, Good - Minor Cosmetic Issues, Fair - Noticeable Cosmetic Issues, Poor - Significant Cosmetic Issues)
[ ] Number of visible fasteners
[ ] Seam Integrity (If Applicable) (Seams Properly Sealed, Minor Seam Leakage, Significant Seam Leakage)
[ ] Notes on any observed issues or corrective actions taken.
[ ] Debris Removal (Complete - Site Clean and Free of Debris, Partial - Some Debris Remains, Incomplete - Significant Debris Remains)
[ ] Date of Inspection
[ ] Inspector Signature

--- END OF TEMPLATE ---
Transform this text into a digital, automated, and trackable mobile app!
Visit: https://checklistguro.com/templates/construction/flashing-installation-checklist
(Click "Install Template" to launch your digital inspection tool immediately)