FLOOR CLEANING & SAFETY CHECKLIST (INDUSTRIAL)

Created by ChecklistGuro (https://checklistguro.com)

--- PRE-CLEANING INSPECTION & ASSESSMENT ---
[ ] Date of Inspection
[ ] Time of Inspection
[ ] Area/Zone Inspected
[ ] Description of Floor Type (e.g., Concrete, Epoxy, Tile)
[ ] Floor Condition (General) (Excellent, Good, Fair, Poor)
[ ] Identify Debris/Contaminants Present (Check all that apply) (Dust/Dirt, Oil/Grease, Chemical Spills, Loose Materials (e.g., Sawdust, Metal Shavings), Standing Water, Other (Specify in LONG_TEXT))
[ ] Specify 'Other' Debris/Contaminants (if selected)
[ ] Floor Temperature (Degrees Celsius/Fahrenheit)
[ ] Ambient Lighting Conditions (Adequate, Dim, Poor)

--- EQUIPMENT PREPARATION & SAFETY ---
[ ] Equipment Serial Number (Scrubber, Vacuum, etc.)
[ ] Equipment Condition (Pre-Use) (Excellent, Good, Fair, Poor - Needs Repair)
[ ] Safety Checks Performed (Select all that apply) (Visual Inspection for Damage, Check Tire/Wheel Condition, Verify Brush/Pad Condition, Check Fluid Levels (Detergent, Water), Inspect Electrical Cords/Connections, Check for Leaks)
[ ] Any Abnormalities Noted Before Use?
[ ] Personal Protective Equipment (PPE) Used? (Yes, No)
[ ] PPE Checklist (If Yes) (Safety Shoes, Gloves, Eye Protection, Hearing Protection, High Visibility Vest)
[ ] Last Maintenance Date
[ ] Time Equipment Ready for Use

--- FLOOR CLEANING PROCEDURES ---
[ ] Floor Type: (Concrete, Epoxy, Tile (Ceramic/Porcelain), Vinyl, Other (Specify in LONG_TEXT))
[ ] Cleaning Method: (Sweeping, Scrubbing (Automated), Scrubbing (Manual), Mopping, Pressure Washing)
[ ] Detergent Concentration (%), as per manufacturer's instructions:
[ ] Water Temperature (Â°C/Â°F):
[ ] Specific Cleaning Instructions/Notes (e.g., heavy grime areas, specific stain removal):
[ ] Rinsing Required? (Yes, No)
[ ] Estimated Cleaning Duration:
[ ] Description of any unusual conditions encountered during cleaning:
[ ] Chemicals Used (Check all that apply): (Degreaser, Disinfectant, Acid Cleaner, Alkaline Cleaner, Neutral Cleaner, Other (Specify in LONG_TEXT))

--- SPILL RESPONSE & CONTAINMENT ---
[ ] Type of Spill (if applicable) (Water, Oil/Grease, Chemical, Solid (e.g., dust, powders), Unknown)
[ ] Description of Spill (Volume, Appearance, Location)
[ ] Exact Spill Location (Coordinates or Specific Area)
[ ] Containment Measures Implemented (Absorbent Materials (e.g., pads, granules), Dikes/Barriers, Covering/Shrouding, None Required, Other)
[ ] Absorbent Materials Used (Clay, Sand, Commercial Absorbent, Other)
[ ] Details of Clean-up Procedures (e.g., disposal method, equipment used)
[ ] Estimated Spill Volume (gallons/liters)
[ ] Spill Reported to Relevant Authorities (if required)? (Yes, No, Not Applicable)
[ ] Date of Spill Event
[ ] Time of Spill Event

--- POST-CLEANING INSPECTION & VERIFICATION ---
[ ] Floor Appearance: Is the floor free of visible dirt, debris, and stains? (Yes, No)
[ ] Slip Resistance: Does the floor maintain adequate slip resistance? (Yes, No, Not Tested)
[ ] Slip Resistance Measurement (if applicable): Record the coefficient of friction (COF) reading.
[ ] Floor Markings: Are all safety markings (lines, symbols) clear and visible? (Yes, No)
[ ] Any Issues Noted: Describe any areas requiring further attention or reporting.
[ ] Drains/Grates: Are drains and grates clear of obstructions? (Yes, No)
[ ] Next Scheduled Inspection Date

--- DOCUMENTATION & REPORTING ---
[ ] Date of Cleaning
[ ] Start Time of Cleaning
[ ] End Time of Cleaning
[ ] Area Cleaned (sq. ft / sq. m)
[ ] Description of Cleaning Methods Used
[ ] Any Unusual Conditions or Issues Encountered
[ ] Corrective Actions Taken (if any)
[ ] Floor Condition Post Cleaning (Excellent, Good, Fair, Poor)
[ ] Cleaner Signature
[ ] Supporting Photos (Optional)

--- END OF TEMPLATE ---
Transform this text into a digital, automated, and trackable mobile app!
Visit: https://checklistguro.com/templates/facility-management/floor-cleaning-safety-checklist-industrial
(Click "Install Template" to launch your digital inspection tool immediately)