FOUNDATION WATERPROOFING INSTALLATION CHECKLIST

Created by ChecklistGuro (https://checklistguro.com)

--- PRE-INSTALLATION ASSESSMENT & PREPARATION ---
[ ] Site Inspection Date
[ ] Detailed Site Conditions Report
[ ] Foundation Elevation (ft)
[ ] Soil Type (Clay, Sand, Silt, Gravel, Loam, Other)
[ ] Existing Drainage Assessment (if applicable)
[ ] Previous Waterproofing Systems (if any) (None, Bituminous Coating, Membrane, Other)
[ ] Site Survey/Topography Map
[ ] Contractor License Number

--- SURFACE PREPARATION ---
[ ] Existing Condition Description
[ ] Surface Contaminants Present (Check All That Apply) (Dirt/Debris, Oil/Grease, Mold/Mildew, Efflorescence, Existing Coatings, Other (Specify in Long Text))
[ ] Describe Remediation Steps for Contaminants
[ ] Surface Roughness (SPI Value)
[ ] Surface Preparation Method Used (Brush Cleaning, Pressure Washing, Grinding, Other (Specify in Long Text))
[ ] Photographic Evidence of Prepared Surface
[ ] Moisture Content of Surface (Dry, Slightly Damp, Damp, Wet, N/A)

--- WATERPROOFING MEMBRANE APPLICATION ---
[ ] Ambient Temperature During Application (Fahrenheit)
[ ] Surface Temperature During Application (Fahrenheit)
[ ] Application Method (Spray Applied, Roller Applied, Brush Applied)
[ ] Coating Thickness (Dry Film Thickness, mils)
[ ] Detailed Notes on Application Process (e.g., any deviations from manufacturer's instructions)
[ ] Photographic Evidence of Membrane Application (Multiple Images)
[ ] Membrane Coverage (Full/Partial) (Full, Partial)
[ ] Describe any observed defects or irregularities during application

--- JOINT & CRACK TREATMENT ---
[ ] Crack Width Assessment (inches) (< 1/8, 1/8 - 1/4, 1/4 - 1/2, > 1/2)
[ ] Crack Treatment Method (Epoxy Injection, Polyurethane Foam, Hydraulic Cement, Flexible Sealant, Other (Specify in LONG_TEXT))
[ ] If 'Other' Treatment Method Selected, Please Specify:
[ ] Depth of Crack Treatment (inches)
[ ] Photo Documentation of Crack Treatment
[ ] Joint Type (Control Joint, Construction Joint, Expansion Joint, Other)
[ ] Notes on Joint Treatment (if 'Other' selected)

--- DRAINAGE SYSTEM INSTALLATION ---
[ ] Drainage System Type (Perimeter Drain with Gravel, French Drain, Dimple Board System, Other (Specify in Long Text))
[ ] Gravel Depth (inches)
[ ] Drain Pipe Diameter (inches)
[ ] Description of Drainage Slope and Route
[ ] Filter Fabric Used? (Yes, No)
[ ] Photo of Drain Pipe Installation
[ ] Outlet Discharge Point Confirmed? (Yes, No)
[ ] Comments on Drainage System Installation (if any)

--- PROTECTION & BACKFILLING ---
[ ] Description of Protective Layer Installation (e.g., geotextile, sand)
[ ] Minimum Protective Layer Thickness (inches)
[ ] Backfill Material Type (Clean Sand, Gravel, Other (Specify))
[ ] Notes regarding compaction of backfill material.
[ ] Date of Backfilling Completion
[ ] Backfill Compaction Method (Hand Compaction, Plate Compactor, Roller, Other (Specify))
[ ] Any observed issues during backfilling (e.g., water intrusion)
[ ] Photos of Backfilled Area (pre & post)

--- QUALITY CONTROL & DOCUMENTATION ---
[ ] Date of Waterproofing Installation
[ ] Ambient Temperature During Installation (°C/°F)
[ ] Substrate Temperature During Installation (°C/°F)
[ ] Description of Weather Conditions During Installation
[ ] Waterproofing Membrane Manufacturer (Manufacturer A, Manufacturer B, Manufacturer C, Other (Specify))
[ ] Waterproofing Membrane Type (Bituminous, Polyurethane, Cementitious, Other (Specify))
[ ] Photos of Waterproofing Installation (Before/During/After)
[ ] Detailed Notes/Observations During Quality Checks
[ ] Inspection Status (Passed, Failed, Needs Revision)
[ ] Inspector Signature

--- END OF TEMPLATE ---
Transform this text into a digital, automated, and trackable mobile app!
Visit: https://checklistguro.com/templates/construction/foundation-waterproofing-installation-checklist
(Click "Install Template" to launch your digital inspection tool immediately)