JSA (JOB SAFETY ANALYSIS)

Created by ChecklistGuro (https://checklistguro.com)

--- JOB IDENTIFICATION & INFORMATION ---
[ ] Job Title
[ ] Department
[ ] Location (Specific Area)
[ ] Job Number / ID (if applicable)
[ ] Date of JSA Creation
[ ] Brief Description of Job
[ ] Frequency of Job (Daily, Weekly, Monthly, Other (Specify))
[ ] Is this a new or existing job? (New, Existing)
[ ] Employee(s) Performing Job (Primary)

--- JOB STEPS BREAKDOWN ---
[ ] Step Number
[ ] Step Description
[ ] Detailed Explanation of Step (if needed)
[ ] Estimated Time to Complete Step (e.g., minutes)
[ ] Specific Location of Step (e.g., Machine ID, Workstation)
[ ] Resources Required for this Step (Materials, Tools, Equipment, Personnel, Other)
[ ] Date Step Typically Performed (if recurring)

--- HAZARD IDENTIFICATION ---
[ ] Describe the potential physical hazards present (e.g., noise, vibration, sharp edges, moving machinery)
[ ] Describe any potential chemical hazards (e.g., fumes, dust, liquids)
[ ] Potential Ergonomic Hazards? (Repetitive Motions, Awkward Postures, Forceful Exertions, Static Loading, None, Other)
[ ] Identify any potential biological hazards (e.g., bacteria, viruses, mold)
[ ] Are there any confined space concerns? (Yes, No, Unsure)
[ ] Describe any potential fall hazards
[ ] Estimated Noise Level (dB)
[ ] Any other hazards observed?

--- RISK ASSESSMENT (SEVERITY & PROBABILITY) ---
[ ] Severity Rating (Negligible (No injury or illness), Minor (First Aid Required), Moderate (Medical Treatment Required), Serious (Disabling Injury), Catastrophic (Fatality))
[ ] Probability Rating (Rare (Unlikely to occur), Remote (Could occur in time), Occasional (Likely to occur occasionally), Probable (Likely to occur), Frequent (Expected to occur often))
[ ] Severity Score (Numerical)
[ ] Probability Score (Numerical)
[ ] Risk Score (Severity x Probability)
[ ] Justification for Ratings
[ ] Risk Level (Derived) (Low, Medium, High, Extreme)

--- CONTROL MEASURES ---
[ ] Hierarchy of Controls Applied (Check all that apply) (Elimination, Substitution, Engineering Controls, Administrative Controls, Personal Protective Equipment (PPE))
[ ] Detailed Description of Engineering Controls Implemented
[ ] Specific Procedures/Work Instructions Updated or Created
[ ] Frequency of Safety Checks/Inspections for Equipment (e.g., daily, weekly, monthly)
[ ] Details of Additional Training Required (beyond standard job training)
[ ] Administrative Controls Implemented (Check all that apply) (Permit-to-Work System, Lockout/Tagout, Safe Work Procedures, Job Rotation, Signage/Warnings)
[ ] Specific Details of PPE Required and its Proper Usage

--- PERSONAL PROTECTIVE EQUIPMENT (PPE) ---
[ ] Required PPE for this job: (Safety Glasses/Goggles, Hearing Protection, Hard Hat, Safety Shoes/Boots, Gloves (specify type), Respirator (specify type), High-Visibility Clothing, Face Shield, Apron/Coveralls)
[ ] Specific Glove Type & Material (if applicable):
[ ] Respirator Type & Fit Testing Information (if applicable):
[ ] Any PPE Modification or Special Considerations:
[ ] PPE Inspection Frequency (e.g., Daily, Weekly, Monthly):
[ ] Last PPE Inspection Date:
[ ] Employee Acknowledgement of PPE Requirements:

--- TRAINING & COMMUNICATION ---
[ ] Brief Description of Training Provided
[ ] Topics Covered in Training (Check all that apply) (Job-Specific Hazards, Safe Operating Procedures, Emergency Procedures, PPE Usage & Maintenance, Lockout/Tagout Procedures, Chemical Handling (if applicable))
[ ] Number of Employees Trained
[ ] Date of Training
[ ] Trainer Name
[ ] Employee Acknowledgement of Training
[ ] Notes on Communication Methods Used (e.g., toolbox talks, posters)

--- REVIEW & APPROVAL ---
[ ] JSA Completion Date
[ ] Job Analyst Signature
[ ] Supervisor/Manager Approval
[ ] Reviewer Name (if different from analyst)
[ ] Date of Last Review
[ ] Review Interval (months)
[ ] Comments/Notes (regarding review and approval)

--- REVISION HISTORY ---
[ ] Revision Date
[ ] Revision Number
[ ] Description of Changes
[ ] Prepared By (Initials)
[ ] Prepared Signature
[ ] Reviewed By (Initials)
[ ] Reviewed Signature

--- EQUIPMENT & TOOLS CHECKLIST ---
[ ] Equipment Condition - Visual Inspection (Good, Fair, Poor - Needs Repair)
[ ] Equipment Last Inspection Date (YYYY-MM-DD)
[ ] Tool Condition - General (Excellent, Good, Needs Maintenance, Unsafe - Do Not Use)
[ ] Essential Tools Required (Wrench Set, Screwdriver Set, Measuring Tape, Safety Glasses, Gloves, Level, Hammer, Specialized Tool (Specify in LONG_TEXT))
[ ] Specify Specialized Tool (if selected above)
[ ] Guard Placement (Present and Functioning, Missing, Damaged)
[ ] Calibration Status (if applicable) (Calibrated and Within Tolerance, Calibration Expired, Not Applicable)

--- END OF TEMPLATE ---
Transform this text into a digital, automated, and trackable mobile app!
Visit: https://checklistguro.com/templates/manufacturing/jsa-job-safety-analysis
(Click "Install Template" to launch your digital inspection tool immediately)