MACHINE SAFETY AUDIT CHECKLIST: MANUFACTURING WORKPLACE RISK ASSESSMENT

Created by ChecklistGuro (https://checklistguro.com)

--- MACHINE IDENTIFICATION & DOCUMENTATION ---
[ ] Machine Name/Model
[ ] Machine Serial Number
[ ] Date of Last Manual Update
[ ] Manual Location (Physical/Digital) (Physical Location, Digital - URL, Both)
[ ] Upload a copy of the Machine Manual (if available)
[ ] Is a Safety Risk Assessment available for this machine? (Yes, No)
[ ] Risk Assessment Document Number (if applicable)

--- GUARDS & SAFETY DEVICES ---
[ ] Guard Condition (Overall) (Excellent, Good, Fair, Poor, N/A)
[ ] Interlock Functionality (Functional, Defective, N/A)
[ ] Light Curtain Sensor Count (if applicable)
[ ] Emergency Stop Button Condition (Functional, Defective, Missing, N/A)
[ ] Description of any Guard Damage or Modifications
[ ] Emergency Stop Circuit Test Result (Pass/Fail) (Pass, Fail, N/A)
[ ] Photo Evidence of Guard Condition (if applicable)

--- LOCKOUT/TAGOUT PROCEDURES ---
[ ] Describe the current Lockout/Tagout (LOTO) procedure for this machine.
[ ] Number of employees trained on LOTO for this machine in the past year.
[ ] Date of last LOTO procedure review and update.
[ ] Which of the following LOTO steps are included in the procedure? (Identify energy sources, Isolate energy sources, Apply lockout/tagout devices, Verify isolation, Authorized personnel only)
[ ] Upload a copy of the machine-specific LOTO procedure document.
[ ] Is the LOTO procedure clearly posted near the machine? (Yes, No, N/A)
[ ] Typical time required to complete LOTO procedure (estimated).
[ ] Signature of person verifying LOTO procedure.

--- EMERGENCY STOP FUNCTIONALITY ---
[ ] Time of Emergency Stop Test
[ ] Time to Stop (seconds)
[ ] E-Stop Button Condition (Excellent, Good, Fair, Poor)
[ ] Circuit Functionality (Functional, Partially Functional, Non-Functional)
[ ] Notes/Observations (if any issues detected)
[ ] Technician Signature (Confirmation of Test)

--- OPERATOR TRAINING & COMPETENCY ---
[ ] Operator Training Hours Completed
[ ] Training Modules Covered (Machine-Specific Safety Procedures, Lockout/Tagout, Emergency Response, Personal Protective Equipment (PPE))
[ ] Date of Last Training Session
[ ] Topics Covered in Training (Select all that apply) (Basic Machine Operation, Safety Interlocks, Emergency Stop Procedures, Troubleshooting)
[ ] Summary of Training Content
[ ] Assessment Type (Written Exam, Practical Demonstration, Both)
[ ] Assessment Score (if applicable)
[ ] Operator Signature

--- WORKPLACE LAYOUT & ACCESSIBILITY ---
[ ] Minimum Safe Distance from Machine (Feet)
[ ] Adequate Lighting Present? (Yes, No, N/A)
[ ] Clear Pathways Around Machine? (Yes, No, Partially Obstructed)
[ ] Describe Any Obstructions or Hazards
[ ] Sufficient Space for Maintenance? (Yes, No, Unsure)
[ ] Record Location of Machine for Reference

--- PERSONAL PROTECTIVE EQUIPMENT (PPE) ---
[ ] Required PPE for Machine Operation (Safety Glasses, Hearing Protection, Gloves, Steel-Toe Boots, Respirator, Face Shield)
[ ] Quantity of Safety Glasses Available
[ ] Quantity of Hearing Protection Available
[ ] Comments/Observations Regarding PPE Condition
[ ] Last PPE Inspection/Replacement Date

--- MACHINE-SPECIFIC HAZARDS ---
[ ] Describe any potential pinch points or entanglement hazards.
[ ] Record the noise level (dB) at the operator's position.
[ ] Select any airborne contaminants present during operation. (Dust, Fumes, Mist, Gases, None)
[ ] Record operating temperature range (Celsius/Fahrenheit).
[ ] Describe any potential for projectile hazards or flying debris.
[ ] Severity of electrical hazards? (Low, Medium, High)
[ ] Upload photos or videos of identified hazards.

--- REGULAR INSPECTIONS & MAINTENANCE ---
[ ] Date of Last Inspection
[ ] Inspection Interval (days/weeks/months)
[ ] Type of Maintenance Performed
[ ] Details of Maintenance Activities
[ ] Lubricant Level (if applicable)
[ ] Condition of Filters (if applicable) (Excellent, Good, Fair, Poor)
[ ] Date of Next Scheduled Maintenance
[ ] Maintenance Start Time

--- CORRECTIVE ACTIONS & FOLLOW-UP ---
[ ] Severity Rating (1-5)
[ ] Detailed Description of Corrective Action Required
[ ] Target Completion Date
[ ] Responsible Party (Maintenance, Production, Engineering, Safety)
[ ] Notes/Comments
[ ] Status (Open, In Progress, Completed, On Hold)
[ ] Actual Completion Date

--- END OF TEMPLATE ---
Transform this text into a digital, automated, and trackable mobile app!
Visit: https://checklistguro.com/templates/manufacturing/machine-safety-audit-checklist-manufacturing-workplace-risk-assessment
(Click "Install Template" to launch your digital inspection tool immediately)