MANUFACTURING EQUIPMENT PREVENTIVE MAINTENANCE CHECKLIST

Created by ChecklistGuro (https://checklistguro.com)

--- SAFETY INSPECTION ---
[ ] Emergency Stop Functionality (Functional, Needs Repair, Not Present)
[ ] Safety Guards in Place (Yes, No, Partial)
[ ] Noise Level (dB)
[ ] Machine Lighting Adequacy (Adequate, Insufficient, Needs Adjustment)
[ ] Any Observed Safety Hazards?

--- VISUAL INSPECTION ---
[ ] Overall Condition (Brief Description)
[ ] Detailed Description of Any Visible Damage or Wear
[ ] Check for the following: (Select all that apply) (Leaks, Cracks, Corrosion, Loose Parts, Cracks in welds, Discoloration, Paint Damage)
[ ] Corrosion Level (1-10, 1=None, 10=Severe)
[ ] Attach Photo of Area of Concern (Optional)
[ ] Welds inspected? (if applicable) (Yes, No, N/A)

--- LUBRICATION ---
[ ] Lubricant Type (Grease, Oil, Other)
[ ] Quantity Applied (oz/ml)
[ ] Lubricant Brand
[ ] Last Lubrication Date
[ ] Notes on Lubrication Condition

--- ELECTRICAL CHECKS ---
[ ] Voltage Reading (V)
[ ] Current Draw (A)
[ ] Wiring Condition (Excellent, Good, Fair, Poor)
[ ] Wiring Issues Observed (Cracked Insulation, Exposed Wires, Loose Connections, Burn Marks, None)
[ ] Motor Sound (Describe)
[ ] Last Electrical Inspection Date

--- MECHANICAL CHECKS ---
[ ] Bearing Temperature (Â°C)
[ ] Gear Mesh Condition (1-10, 1=Good, 10=Bad)
[ ] Chain/Belt Condition (Good, Fair, Poor, Needs Replacement)
[ ] Shaft Runout (mm)
[ ] Notes on Mechanical Wear or Issues
[ ] Piston Cylinder Condition (if applicable) (Good, Scratches, Leaks, Needs Replacement)

--- HYDRAULIC/PNEUMATIC SYSTEMS (IF APPLICABLE) ---
[ ] Hydraulic Fluid Level (inches)
[ ] Pneumatic System Pressure (PSI)
[ ] Fluid Condition (Visual Inspection) (Clean, Slightly Cloudy, Cloudy/Contaminated)
[ ] Leaks Detected? (Hose, Fitting, Cylinder, Reservoir, None)
[ ] Leak Description (if applicable)
[ ] Filter Replacement Date
[ ] Technician Signature

--- PERFORMANCE TESTING ---
[ ] Output Quantity
[ ] Cycle Time (seconds)
[ ] Accuracy (percentage)
[ ] Energy Consumption (kWh)
[ ] Overall Performance Rating (Excellent, Good, Fair, Poor)
[ ] Performance Notes

--- CLEANING & HOUSEKEEPING ---
[ ] Detailed Description of Cleaning Performed
[ ] Amount of Cleaning Solution Used (Gallons/Liters)
[ ] Areas Cleaned (Check all that apply) (Exterior Surfaces, Internal Components, Control Panels, Safety Guards, Floor Around Equipment)
[ ] Notes on Any Unusual Residue or Build-Up
[ ] Photos of Cleaning (Before & After)

--- CALIBRATION (IF APPLICABLE) ---
[ ] Calibration Reading 1
[ ] Calibration Reading 2
[ ] Target Value
[ ] Calibration Standard Used (NIST, ASTM, Manufacturer's Standard, Other)
[ ] Calibration Notes/Observations
[ ] Calibration Completion Date
[ ] Calibrator Signature

--- DOCUMENTATION & RECORD KEEPING ---
[ ] Date of Inspection
[ ] Time of Inspection
[ ] Meter Reading (e.g., Hour Meter)
[ ] Observations/Notes
[ ] Condition Assessment (Excellent, Good, Fair, Poor)
[ ] Supporting Documents/Photos (Optional)
[ ] Technician Signature
[ ] Technician Name

--- END OF TEMPLATE ---
Transform this text into a digital, automated, and trackable mobile app!
Visit: https://checklistguro.com/templates/maintenance-management/manufacturing-equipment-preventive-maintenance-checklist
(Click "Install Template" to launch your digital inspection tool immediately)