MINING EQUIPMENT MAINTENANCE CHECKLIST

Created by ChecklistGuro (https://checklistguro.com)


--- PRE-OPERATION INSPECTION ---
[ ] Date of Inspection
[ ] Time of Inspection
[ ] Equipment Hour Reading
[ ] Equipment Condition (Pre-Operation) (Excellent, Good, Fair, Poor)
[ ] Observed Issues (Pre-Operation)
[ ] Operator Present? (Yes, No)
[ ] Inspector Signature

--- FLUID LEVEL CHECKS ---
[ ] Engine Oil Level
[ ] Coolant Level
[ ] Hydraulic Fluid Level
[ ] Fuel Level
[ ] Gear Oil Condition (Excellent, Good, Fair, Poor)
[ ] Any Fluid Leaks Observed?

--- VISUAL INSPECTION ---
[ ] Describe any visible damage (e.g., cracks, dents, rust)
[ ] Rust Level (0-10, 0=None, 10=Severe)
[ ] Condition of Tracks/Belts (if applicable) (Good, Fair, Poor, Needs Replacement)
[ ] Check all applicable: (Leaks) (Hydraulic Fluid, Oil, Coolant, None)
[ ] Upload photos of damage/concerns
[ ] Condition of Safety Guards (Intact, Damaged, Missing)
[ ] Describe any unusual wear patterns

--- SAFETY SYSTEM CHECKS ---
[ ] Emergency Stop Functionality (Functioning Correctly, Needs Attention, Malfunctioning)
[ ] Brake System Test (Pass, Fail, Not Tested)
[ ] Brake Pressure (PSI)
[ ] Alarm System Check (Audible, Visual, Both, Not Tested)
[ ] Last Safety System Inspection Date
[ ] Technician Signature

--- COMPONENT FUNCTIONALITY TESTING ---
[ ] Track Tension Check (Within Range, Too Loose, Too Tight)
[ ] Conveyor Belt Speed (m/s)
[ ] Hydraulic Cylinder Leakage (No Leakage, Minor Leakage, Significant Leakage)
[ ] Engine RPM at Idle
[ ] Alarm System Test (Passed, Failed - Needs Repair)
[ ] Notes on Functionality Testing

--- LUBRICATION PROCEDURES ---
[ ] Lubricant Type (Oil-Based, Synthetic, Water-Based)
[ ] Quantity Lubricant Used (liters/gallons)
[ ] Lubrication Date
[ ] Lubrication Time
[ ] Notes on Lubrication Quality/Condition
[ ] Grease Application Method (Manual, Automated)
[ ] Grease Points Lubricated

--- POST-MAINTENANCE VERIFICATION ---
[ ] Engine RPM at Idle
[ ] Hydraulic Pressure (PSI)
[ ] Track Tension Check (Correct, Needs Adjustment, Incorrect)
[ ] Brake Functionality (Nominal, Needs Adjustment, Faulty)
[ ] Next Scheduled Maintenance Date
[ ] Time of Verification
[ ] Any unusual noises observed?

--- DOCUMENTATION & RECORD KEEPING ---
[ ] Date of Maintenance
[ ] Start Time of Maintenance
[ ] End Time of Maintenance
[ ] Hours Worked
[ ] Detailed Description of Work Performed
[ ] Parts Replaced & Quantities
[ ] Maintenance Type (Preventative, Corrective, Emergency)
[ ] Technician Signature
[ ] Attach Photos/Videos (Optional)

--- END OF TEMPLATE ---
Transform this text into a digital, automated, and trackable mobile app!
Visit: https://checklistguro.com/templates/support-management/mining-equipment-maintenance-checklist
(Click "Install Template" to launch your digital inspection tool immediately)