MINING SURVEY AND MAPPING CHECKLIST

Created by ChecklistGuro (https://checklistguro.com)

--- PRE-SURVEY PLANNING & PREPARATION ---
[ ] Survey Planned Start Date
[ ] Survey Planned Completion Date
[ ] Estimated Time Required for Survey
[ ] Number of Surveyors Required
[ ] Survey Type (e.g., Topo, Volume, Grade) (Topographic, Volume Calculation, Grade Control, Other)
[ ] Area to be Surveyed (Surface, Underground, Both)
[ ] Specific Survey Objectives & Scope
[ ] Existing Site Plans or Drawings (if applicable)

--- CONTROL POINT VERIFICATION ---
[ ] Control Point ID
[ ] Northing (m)
[ ] Easting (m)
[ ] Elevation (m)
[ ] Verification Method (Independent Traverse, GPS/GNSS, Comparison with Existing Data)
[ ] Observed Northing Deviation (m)
[ ] Observed Easting Deviation (m)
[ ] Observed Elevation Deviation (m)
[ ] Status (Acceptable, Marginal, Unacceptable)
[ ] Comments / Remedial Actions

--- DATA ACQUISITION â€“ GROUND SURVEYS ---
[ ] Total Station Accuracy (mm)
[ ] Level Accuracy (mm)
[ ] Start Time of Survey
[ ] Date of Survey
[ ] Survey Method Used (e.g., Traverse, Radiation) (Traverse, Radiation, Resection)
[ ] Location of Survey Point
[ ] Instrument Technician Name

--- DATA ACQUISITION â€“ AERIAL/DRONE SURVEYS ---
[ ] Flight Date
[ ] Flight Start Time
[ ] Drone Flight Hours
[ ] Weather Conditions (Clear, Partly Cloudy, Overcast, Foggy)
[ ] Ground Control Point (GCP) Count
[ ] GCP Quality Check Passed? (Position, Visibility, Accuracy)
[ ] Flight Path/Mission Plan (PDF)
[ ] Primary Flight Area Coordinates

--- DATA PROCESSING & ADJUSTMENT ---
[ ] Total Station Angle Variance (seconds)
[ ] Total Station Distance Variance (mm)
[ ] Datum Transformation Applied? (Yes, No)
[ ] Details of Datum Transformation (if applicable)
[ ] Error Ellipse Assessment Completed? (Yes, No)
[ ] Description of Error Ellipse Assessment
[ ] Processed Data File

--- SURFACE MAPPING AND MODELING ---
[ ] Northing Coordinate (m)
[ ] Easting Coordinate (m)
[ ] Date of Survey
[ ] Time of Survey
[ ] Mapping Method (Total Station, GPS/GNSS, Laser Scanning)
[ ] Raw Survey Data (e.g., .tsp, .las)
[ ] Notes on Surface Conditions
[ ] Model Accuracy Requirement (High, Medium, Low)

--- UNDERGROUND MAPPING & VOLUMETRIC CALCULATIONS ---
[ ] Station Number
[ ] Northing (m)
[ ] Easting (m)
[ ] Elevation (m)
[ ] Mapping Method (Laser Scan, Sketch, Tachymetry)
[ ] Distance Measured (m)
[ ] Angle Measured (degrees)
[ ] Notes/Observations

--- DATUM AND COORDINATE SYSTEM CONSISTENCY ---
[ ] Primary Datum Used (UTM, MGA, Other (Specify))
[ ] Coordinate System Zone (55, 56, Other (Specify))
[ ] Datum Transformation Parameters (if applicable)
[ ] Explanation of Coordinate System Application
[ ] Accuracy Standard (meters)
[ ] Verification Method (Check against known points, Software validation, Independent review)

--- REPORTING & DOCUMENTATION ---
[ ] Summary of Survey Findings
[ ] Date of Report Completion
[ ] Report Version Number
[ ] Report Distribution Method (Email, Hard Copy, etc.) (Email, Hard Copy, Shared Drive)
[ ] Attachment: Survey Accuracy Report
[ ] Surveyor Signature

--- DATA SECURITY & STORAGE ---
[ ] Data Encryption Method (AES-256, RSA, Other (Specify))
[ ] Data Backup Frequency (Days)
[ ] Backup Storage Location (On-site Server, Cloud Storage, Off-site Server)
[ ] Details of Access Control Measures
[ ] Data Retention Policy Status (Compliant, Non-Compliant, Under Review)
[ ] Last Security Audit Date

--- END OF TEMPLATE ---
Transform this text into a digital, automated, and trackable mobile app!
Visit: https://checklistguro.com/templates/mining-management/mining-survey-and-mapping-checklist
(Click "Install Template" to launch your digital inspection tool immediately)