REINFORCEMENT BAR PLACEMENT CHECKLIST (REBAR)

Created by ChecklistGuro (https://checklistguro.com)

--- GENERAL INFORMATION ---
[ ] Project Name
[ ] Contractor
[ ] Rebar Supplier
[ ] Drawing Revision Number
[ ] Inspection Date
[ ] Area of Inspection
[ ] Inspector Name

--- BAR IDENTIFICATION & SHOP DRAWINGS ---
[ ] Shop Drawing Number Verified? (Yes, No)
[ ] Shop Drawing Revision Checked:
[ ] Bar Mark Number on Bar Verified:
[ ] Bar Marks Confirmed (List separated by commas):
[ ] Discrepancies Noted (if any):
[ ] Rebar Type Consistent with Shop Drawing? (Yes, No)
[ ] Photograph of Marked Bar (if discrepancy)

--- BAR SIZE AND QUANTITY ---
[ ] Bar Mark Verification: Match Quantity from Shop Drawings?
[ ] Actual Number of #X Bar (e.g., #4) Installed
[ ] Quantity Variance: Actual - Required (#X Bar)
[ ] Bar Size Confirmation: Matched Shop Drawing Specification? (Yes, No, N/A)
[ ] Bar Grade Verification (e.g., Grade 60) (Yes, No, N/A)
[ ] Comments/Notes on Bar Size/Quantity Discrepancies (if any)

--- BAR PLACEMENT & SPACING ---
[ ] Bar Cover (mm)
[ ] Clear Distance Between Parallel Bars (mm)
[ ] Bar Alignment with Formwork (Aligned, Slightly Misaligned (Note Below), Misaligned - Correction Required)
[ ] Notes on Bar Alignment (if misaligned)
[ ] Bar Placement Verification (Check All That Apply) (Top of Slab/Beam, Bottom of Slab/Beam, Column Reinforcement, Wall Reinforcement, Other (Specify in Notes))
[ ] Additional Notes Regarding Bar Placement/Spacing
[ ] Vertical Bar Positioning (Correct, Needs Adjustment)

--- BAR SUPPORTS & CHAIRS ---
[ ] Chair Type & Size (Diameter)
[ ] Chair Material Verification (Plastic, Steel, Aluminum, Other (Specify))
[ ] Number of Chairs Used
[ ] Location of Bar Supports (Grid Coordinates/Description)
[ ] Chair Condition (Visible Damage/Wear)
[ ] Support Adequate for Concrete Weight? (Yes, No, NA)
[ ] Photograph of Bar Supports in Place (Optional)

--- LAP SPLICES ---
[ ] Lap Splice Length (mm/inches)
[ ] Splice Type (Overlap, Hooked, Mechanical) (Overlap, Hooked, Mechanical)
[ ] Number of Bars in Lap Splice (Top)
[ ] Number of Bars in Lap Splice (Bottom)
[ ] Tie Wire/Spiral Present at Splice? (Yes, No)
[ ] Notes/Observations regarding lap splice condition
[ ] Clearance Around Splice (Adequate?) (Yes, No)
[ ] Photo Documentation (Optional)

--- WELDED FABRIC REINFORCEMENT ---
[ ] Fabric Weld Quality Score (1-5, 5 being excellent)
[ ] Welding Defects Observed (Check all that apply) (Porosity, Undercut, Slag Inclusions, Incomplete Fusion, None Observed)
[ ] Detailed Description of Welding Observations (if any)
[ ] Fabric Alignment with Formwork (Perfectly Aligned, Minor Misalignment (less than 1/4 inch), Significant Misalignment (greater than 1/4 inch) - Requires Correction, Unacceptable - Requires Immediate Correction)
[ ] Upload Photos of Welded Fabric Reinforcement
[ ] Welder Certification Verified? (Yes, No)

--- SPECIALTY REINFORCEMENT ---
[ ] Type of Specialty Reinforcement Used: (Headed Reinforcement, Corner Reinforcement, Shear Reinforcement, Link Slabs, Other (Specify in LONG_TEXT))
[ ] If 'Other' selected above, please specify the specialty reinforcement type:
[ ] Quantity of Headed Bars Installed:
[ ] Quantity of Corner Reinforcement Installed:
[ ] Condition of Welded Connections (if applicable): (Satisfactory, Requires Correction, Not Applicable)
[ ] Upload Photo of Special Reinforcement Placement:
[ ] Unique Identifier/Tracking Number for Specialty Reinforcement:

--- DOCUMENTATION & SIGN-OFF ---
[ ] Inspection Date
[ ] Inspection Time
[ ] Inspector Name
[ ] Inspector Company
[ ] Comments/Observations
[ ] Rebar Placement Status (Complete & Approved, Complete - Requires Correction, Not Complete)
[ ] Area Checked (sq ft/m2)
[ ] Inspector Signature
[ ] Supporting Photos/Documents (optional)

--- END OF TEMPLATE ---
Transform this text into a digital, automated, and trackable mobile app!
Visit: https://checklistguro.com/templates/construction/reinforcement-bar-placement-checklist-rebar
(Click "Install Template" to launch your digital inspection tool immediately)