SHEATHING INSTALLATION CHECKLIST

Created by ChecklistGuro (https://checklistguro.com)

--- PRE-INSTALLATION PLANNING & MATERIAL VERIFICATION ---
[ ] Sheathing Type Specified? (OSB, Plywood, Cement Board, Other)
[ ] Sheathing Thickness (inches)
[ ] Sheathing Grade Specified? (Premium, Standard, Construction, Unknown)
[ ] Moisture Content (%), Max Allowed
[ ] Review Manufacturer's Installation Instructions
[ ] Upload Approved Shop Drawings
[ ] Date of Material Delivery

--- FRAMING INSPECTION ---
[ ] Framing Member Spacing (inches)
[ ] Framing Member Squareness (inches/100ft)
[ ] Framing Condition - Visible Decay/Damage? (None, Minor, Significant - Requires Repair, Severe - Requires Replacement)
[ ] Notes on Framing Condition (if any)
[ ] Framing Securely Fastened? (Yes, No)
[ ] Check Framing Levelness (inches/10ft)

--- SHEATHING MATERIAL VERIFICATION ---
[ ] Sheathing Type (OSB, Plywood, Cement Board, Other (Specify))
[ ] Sheathing Grade (CDX, BCX, Premium, Other (Specify))
[ ] Moisture Content (%)
[ ] Manufacturer's Instructions Verified?
[ ] Moisture Meter Reading Record (Optional)
[ ] Sheathing Thickness (inches) (1/2, 5/8, 3/4, Other (Specify))

--- LAYOUT & STAGGERING ---
[ ] Panel Layout Offset from Wall Corners (in)
[ ] Minimum Stagger Distance (in)
[ ] Panel Orientation (Horizontal/Vertical) (Horizontal, Vertical)
[ ] Number of Panels Along Length of Wall
[ ] Joint Staggering Method Applied (Minimum 3/4 Offset, Alternating Offset, Manufacturer's Specified Method)
[ ] Notes on Panel Placement (if any)

--- FASTENER INSTALLATION ---
[ ] Fastener Spacing (inches) - Edges
[ ] Fastener Spacing (inches) - Field
[ ] Fastener Type (Nails, Screws, Staples)
[ ] Fastener Size (inches)
[ ] Fastener Head Type (Flat Head, Round Head, Trumpet Head)
[ ] Fastener Depth (inches) - Minimum
[ ] Comments on Fastener Installation (e.g., any adjustments made)

--- PANEL PLACEMENT & SUPPORT ---
[ ] Panel Spacing at Edges (inches)
[ ] Distance from Corner to First Panel (inches)
[ ] Sheathing Support Method (Temporary Bracing, Shoring, Direct Support, Other (Specify in LONG_TEXT))
[ ] If 'Other' Support Method Selected, Provide Details
[ ] Panel Alignment with Framing (Perfectly Aligned, Within Tolerance (Specify in LONG_TEXT))
[ ] If Not Perfectly Aligned, Explain Deviation
[ ] Panel Support Points Verified? (Yes - Every Panel, Yes - Most Panels, No, N/A - Not Applicable)
[ ] Notes on Panel Support Observations

--- SEAM TREATMENT & JOINT DETAILS ---
[ ] Sheathing Joint Treatment Method: (No Treatment Required, Tape (Type Specified), Caulking (Type Specified), Seam Joint System (Manufacturer Specified))
[ ] Details of Seam Joint System (if applicable):
[ ] Tape/Caulk Manufacturer (if applicable):
[ ] Tape/Caulk Coverage (linear feet or area):
[ ] Joint Details Specified in Plans? (Yes, No)
[ ] Description of any Deviations from Specified Joint Details:
[ ] Photo Documentation of Joint Details:

--- QUALITY CONTROL & FINAL INSPECTION ---
[ ] Were all fastener patterns verified against approved plans/specifications? (Yes, No, N/A)
[ ] Number of panels rejected during inspection (if any):
[ ] Description of any defects or non-conformances identified:
[ ] Sheathing panel edges properly aligned with framing? (Yes, No, Partially)
[ ] Are seams properly sealed (if required by design)? (Yes, No, N/A)
[ ] Inspector Signature:
[ ] Inspection Date:

--- END OF TEMPLATE ---
Transform this text into a digital, automated, and trackable mobile app!
Visit: https://checklistguro.com/templates/construction/sheathing-installation-checklist
(Click "Install Template" to launch your digital inspection tool immediately)